Espanol 中文 Italiano Francais Espanol Deutsch English Pyccknn American English português português Türk
Plascoat plastic coatings for the oil and gas pipes offer the oil and ags industry with a range of high performance coatings capable of providing the best bond with adjacent 3-layer coatings

Polypropylene and Polyethylene

Purpose made coatings for oil and gas pipelines

Plascoat provides the Oil & Gas industry with a range of high performance coating powders for pipelines, field joints, pipe bends, buckle arrestors, custom fittings and other support structures.

Plascoat FSPE

Plascoat FSPE

Plascoat FSPE is a polyethylene powder coating that is suitable for flame spray applications for pipelines subjected to low temperatures

Product features include:

  • full compatibility with adjacent polyethylene coatings, in the case of field joint coatings
  • suitability for 3-layer systems joints over FBE
  • adherence to relevant parts of ISO FDIS 21809-1 Part A and all parts of ISO FDIS 21809-3
  • the ability of a single layer to perform the same role as a separate adhesive layer and top coat
  • the ability to build up thicknesses to greater than 3mm
  • a OIT that is greater than 40 min
More
Product type:Polyethylene
Brittle temperature:-70°C
Vicat softening point: (ISO 306):≥ 95°C
Specific gravity**:(0.92 – 0.97) g/cm3
Hardness (Shore D):53
Indentation resistance at 23°C:≤0.2mm
Elongation at break:600%

** Values variable dependant on test method

For flame spray equipment Plascoat recommends the Spartacus Coating System from Tecno Supply SRL

Further reading

Data sheets

Plascoat PE09

Plascoat PE09

Plascoat PE09 is a polyethylene powder coating that is suitable for pipelines subjected to low temperatures

Product features include:

  • adherence to relevant parts of ISO FDIS 21809-1 Part A
  • adherence to DIN 30670 (N type)
  • low cost material
More
Product type:Polyethylene
Brittle temperature:-70°C
Vicat softening point: (ISO 306):≥ 100°C
Specific gravity**:(0.92 – 0.95) g/cm3
Hardness (Shore D):51
Indentation resistance at 23°C:≤0.2mm
Elongation at break:500%

Further reading

Data sheets

Plascoat PE10

Plascoat PE10

Plascoat PE10 is a polyethylene powder coating that is suitable for pipelines subjected to low and high temperatures

Product features include:

  • adherence to relevant parts of ISO FDIS 21809-1 Part B
  • adherence to DIN 30670 (S type)
  • low cost material
More
Product type:Polyethylene
Brittle temperature:-70°C
Vicat softening point: (ISO 306):≥ 105°C
Specific gravity**:(0.93 – 0.96) g/cm3
Hardness (Shore D):52
Indentation resistance at 23°C:≤0.2mm
Elongation at break:600%

Further reading

Data sheets

Plascoat PP10

Plascoat PP10

Plascoat PP10 is a polypropylene powder coating that is suitable for flame spray applications for pipelines subjected to high temperatures

Product features include:

  • full compatibility with adjacent polypropylene coatings, in the case of field joint coatings
  • suitability for 3-layer systems joints over FBE
  • adherence to relevant parts of ISO FDIS 21809-1 Part C and all parts of ISO FDIS 21809-3
  • adherence to DIN 30678
  • the ability of a single layer to perform the same role as a separate adhesive layer and top coat
  • the ability to build up thicknesses to greater than 3mm
  • a OIT that is greater than 40 min
  • requirement for less heat to flow out, avoiding potential yellowing problems
  • the benefit of reduced particle bounce-off from the pipe surface during application, thereby minimising powder loss
More
Product type:Polypropylene
Brittle temperature:0°CŦ
Vicat softening point: (ISO 306):≥ 110°C
Specific gravity**:(0.93 – 0.96) g/cm3
Hardness (Shore D):63
Indentation resistance at 23°C:≤0.1mm
Elongation at break:500%

Ŧ For temperatures lower than 0°C please contact Plascoat

For flame spray equipment Plascoat recommends the Spartacus Coating System from Tecno Supply SRL

Further reading

Data sheets

Plascoat PP20

Plascoat PP20

Plascoat PP20 is a polypropylene powder coating that is suitable for pipelines subjected to very high temperatures

Product features include:

  • suitability for 3-layer systems joints over FBE
  • adherence to relevant parts of ISO FDIS 21809-1 Part C
  • adherence to DIN 30678
  • the ability of a single layer to perform the same role as a separate adhesive layer and top coat
More
Product type:Polypropylene
Brittle temperature:0°CŦ
Vicat softening point: (ISO 306):≥ 125°CƗ
Specific gravity**:(0.93 – 0.97) g/cm3
Hardness (Shore D):65
Indentation resistance at 23°C:≤0.1mm
Elongation at break:400%

Ŧ For temperatures lower than 0°C please contact Plascoat

Ɨ For temperatures greater than 125°C please contact Plascoat

Further reading

Data sheets

Plascoat Roughcoat LD

Plascoat Roughcoat LD

Plascoat Roughcoat LD is a polyethylene powder coating that has a high friction surface suitable for pipelines subjected to low temperatures

Product features include:

  • adherence to relevant parts of ISO FDIS 21809-1 Part A
  • adherence to DIN 30670 (N type)
  • low cost material
More
Product type:Polyethylene
Brittle temperature:-80°C
Vicat softening point: (ISO 306):≥ 90°C
Hardness (Shore D):47

Further reading

Data sheets

Plascoat Roughcoat HD

Plascoat Roughcoat HD

Plascoat Roughcoat HD is a polyethylene powder coating that has a high friction surface suitable for pipelines subjected to low and high temperatures

Product features include:

  • adherence to relevant parts of ISO FDIS 21809-1 Part B
  • adherence to DIN 30670 (S type)
  • low cost material
More
Product type:Polyethylene
Brittle temperature:-70°C
Vicat softening point: (ISO 306):≥ 119°C
Hardness (Shore D):57

Further reading

Data sheets

Plascoat Roughcoat PP

Plascoat Roughcoat PP

Plascoat Roughcoat PP is a polypropylene powder coating that has a high friction surface suitable for pipes subjected to very high temperatures

Product features include:

  • adherence to relevant parts of ISO FDIS 21809-1 Part C
  • adherence to DIN 30678
More
Product type:Polypropylene
Brittle temperature:-10°C Ŧ
Vicat softening point: (ISO 306):≥ 155°C Ɨ
Hardness (Shore D):65

Ŧ For temperatures lower than 0°C please contact Plascoat

Ɨ For temperatures greater than 155°C please contact Plascoat

Further reading

Data sheets

For more information contact us