Technical Resources Area

PROVEN SAVINGS THAT CAN BE MADE USING PLASCOAT NG30

Many customers across the world are now enjoying significant benefits with Plascoat NG30. Below is a summary of the savings that have been achieved by just five customers - two in the EU, two in Eastern Europe and one in Southern Europe. These savings are the true figures reported back by the customers - showing that is it quite common for Plascoat NG30 to save processors up to 50% of their coating material cost!

COMPANIES	EU 1	EU 2	Eastern Europe 1	Eastern Europe 2	Southern Europe	Average Saving
Pre-Heat temperatures -
Competitor Powder ºC	400°C	400°C	450°C	425°C	350°C
NG30 ºC	310°C	320°C	330°C	340°C	290°C
Saving ºC	90°C	80°C	120°C	85°C	60°C	87ºC
Post-Heat temperatures -
Competitor Powder ºC	250°C	165°C	200°C	255°C
NG30 ºC	220°C	130°C	160°C	200°C
Saving ºC	30°C	35°C	40°C	55°C		40ºC
Coating Thickness
Competitor Powder - µ	1250μ	830μ	860μ	1000μ	610μ
NG30 - µ	900μ	680μ	660μ	500μ	450μ
Saving - %	28%	18%	23%	50%	35%	30%

A reduction of 90ºC in the pre-heat oven and 40ºC in the post-heat oven is estimated to save around $35,000 - $40,000 per year in energy costs of a standard Harrier Autocoat dipping plant.

THIS SAVING IN ENERGY IS EQUIVALENT TO A 20% REDUCTION IN POLYETHYLENE COATING POWDER COST.

THE SAVING IN TERMS OF MATERIAL USAGE = up to 30%

TOTAL POTENTIAL SAVING USING PLASCOAT NG30 IS EQUIVALENT TO UP TO 50% OF THE POWDER COST!

Plascoat NG30 Data Sheet

Plascoat Systems Ltd.

Trading Estate,

Farnham, Surrey

GU9 9NY, UK

Tel: +44 (0) 1252 733777, Fax: +44 (0) 1252 721250

email: sales@plascoat.com

e-paint