Technical Resources Area

The ART of Protection

 Main Site  |  Technical Index   |  Data Sheets  Processing Guides  |  Enquiry Form  |  Service Conditions

Tel: +44 (0) 1252 733777

Close window

PLASCOAT 9944.040B

Polyethylene Coating Powder for Pipe Coating

Polyéthylène Revêtement de Tube

 

POWDER SINTERING

POUDRAGE

 

Low density copolymer

Copolymère bas densité

 

GENERAL CHARACTERISTICS

Caractéristiques générales

 

Properties

Propriétés

Units

Unités

Standards

Normes

Average values

Valeurs moyennes

    ASTM ISO DIN  
Melt index

Indice de fluidité

g/10 min 1238 1133 53735

2

Density

Densité

  1505 1183 53479 0.935
Tensile strength at break

Résistance rupture

MPa 638 R527 53455 14
Elongation at break

Allongement rupture

% 638 R527 53445 500
Melting point

Température de fusion

°C   3146   108°C
Vicat temperature

Température Vicat

°C 1525 306 53460 90°C
Carbon black content

Teneur en noir de carbone

% NF T 51-140 2.5%
Brittleness temperature

Température de fragilité

°C 746     -80°C
Hardness

Dureté

Shore D 2240     47

 

POWDER SPECIFICATIONS

Caractéristiques de la poudre

 

Nominal particle size

Taille nomile des particules

μm  

400

Density

Densité

  1895     >0.932
Powder flow

Ecoulement de la poudre

sec 1895     20
Powder distribution

Répartition de la poudre

  Sieve size (μm) Taille des tamis
>500 500-425 425-150 <150
<0.1 <5 >94.9 <1

 

RECOMMENDED COATING CONDITIONS

Preconisation pour l'application

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

wall thickness

épaisseur du tube

coating time

temps de revêtement

coating thickness

éppaisseur revêtement

pre-heating temperature

temperature de préchauffage

pre-heating time

temps de préchauffage

4mm 90 sec 1.9mm 340-360°C 12-15 mins
8mm 240 sec 2.5mm 300-320°C 20-25 mins

 

MAIN STEEL PIPE COATINGS INDUSTRY STANDARDS COMPLIED

PRINCIPALS NORMES FRANCHIES

 

Plascoat 9944.040B complies with DIN 30670 standard

 

*Further technical advice may be obtained from Plascoat concerning the effects of particular chemicals or mixtures.

 

QUALITY

Plascoat is committed to the manufacture and supply of a wide range of thermoplastic coating powders. This service is backed by the unrivalled experience of over 50 years of powder coating application.

With a policy of continuous improvement to its range of products, Plascoat reserves the right to alter or amend any item. Stringent quality control procedures are carried out at every relevant stage of manufacture and Plascoat operates a quality management system approved by BSI in accordance with ISO 9001:2008.

 

Suitability for application and performance of finished goods coated with Plascoat is the sole responsibility of the customer and end user.
Product and item design, pre-treatment, coating conditions, quality assurance and conditions of product end use are among the factors that affect performance of the coated products and are outside Plascoat’s control.

Plascoat expressly denies specific or implied warrantees including warrantees for fitness for a particular use or purpose.
 

 

Plascoat can also offer, through its factories in Europe, specialist plastic coating equipment, an extensive custom coating service and a size reduction service for plastics and other materials.

 

Plascoat is a subsidiary member of the IPT Group of companies.

 

Plascoat is a UK registered trade name.

 

It should be appreciated that the information given here is, to the best of our knowledge, true and accurate. However, since conditions under which our materials and equipment may be used are beyond our control, recommendations are made without warranty or guarantee.

See also    PPA 801    PPA 571H

 


Plascoat Systems Limited
Trading Estate,
Farnham, Surrey,
GU9 9NY
United Kingdom
Tel: +44 (0) 1252 733777
Fax: +44 (0) 1252 721250
email: sales@plascoat.com
Plascoat Europe BV
Meeuwenoordlaan 19,
Postbus 9
3214VT Zuidland
The Netherlands
Tel:+31 (0) 181 458 888
Fax:+31 (0) 181 458 877
salespce@plascoat.nl
Plascoat Corp
Crown Centre
Suite 600
5005 Rockside Rd
Cleveland
OH44131 U.S.A.
Tel: 800 489 7236
Fax:+1 216 520 1273
plascoat@nls.net
Plascoat Corp (Sales & Dist)
Punda Mercantile Inc
4115 Sherbrooke Str West,
Suite 610, Montreal,
Quebec H3Z 1K9
Call: 800 489 7236
Tel: +1 514 931 7278
Fax: +1 514 931 7200
sales@punda.com

9944/19/04/06 /Web