Technical Resources Area

Search Page | Service Conditions | Main Site | Data Sheets

PROVEN SAVINGS THAT CAN BE MADE USING PLASCOAT NG30

Many customers across the world are now enjoying significant benefits with Plascoat NG30. Below is a summary of the savings that have been achieved by just four customers - two in the EU and two in Eastern Europe. These savings are the true figures reported back by the customers - showing that is it quite common for Plascoat NG30 to save processors up to 50% of their coating material cost!

COMPANIES	EU 1	EU 2	Eastern Europe 1	Eastern Europe 2	Average Saving
Pre-Heat temperatures -
Competitor Powder ºC	400	400	450	425
NG30 ºC	310	320	330	340
Saving ºC	90	80	120	85	94ºC
Post-Heat temperatures -
Competitor Powder ºC	250	165	200	255
NG30 ºC	220	130	160	200
Saving ºC	30	35	40	55	40ºC
Coating Thickness
Competitor Powder - µ	1250	830	860	1000
NG30 - µ	900	680	660	500
Saving - %	28	18	23	50	30%

A reduction of 90ºC in the pre-heat oven and 40ºC in the post-heat oven is estimated to save around $20,000 - $25,000 per year in energy costs of a standard Harrier Autocoat dipping plant.

THIS SAVING IN ENERGY IS EQUIVALENT TO A 20% REDUCTION IN POLYETHYLENE COATING POWDER COST.

THE SAVING IN TERMS OF MATERIAL USAGE = up to 30%

TOTAL POTENTIAL SAVING USING PLASCOAT NG30 IS EQUIVALENT TO UP TO 50% OF THE POWDER COST!

Plascoat NG30 Data Sheet

Plascoat Systems Ltd.

Trading Estate,

Farnham, Surrey

GU9 9NY, UK

Tel: +44 (0) 1252 733777, Fax: +44 (0) 1252 721250

email: sales@plascoat.com